Happy Tech

The cost of electricity has more than doubled for businesses over the last decade. But today, the phrase "going green" is widely talked about in relation to business survival, which is to reduce the impact on the environment. But surveys show many companies are still struggling to understand the technology available and are wary about the upfront costs involved. Technology of Business offers guidance on the most effective ways for businesses to cut their energy bills and start operations more naturally and sustainably. LED lighting Turning to LED - Light Emitting Diode - lighting is the quickest and simplest way any business action can be taken to reduce energy use, argues Myles McCarthy, director of implementation at the Carbon Trust. A traditional 60 watt incandescent bulb will produce about 750 to 1,000 lumens - a measure of lighting power - but 95% of the energy used to create light would normally be wasted in heat. Modern LED bulbs are much more thermally efficient and c

Along with the development of technology, energy use also increases, especially its use in households. Household appliances such as refrigerators, irons, air conditioning, and many others require a lot of energy to use. This enormous use of energy has led some innovators to think for the future. several technological breakthroughs to reduce energy consumption levels have been made. Here are some of these new technologies. 1. Smarthome Technological developments have penetrated the property world. This is evidenced by the large number of home hardware such as air conditioners, lights, and others that are connected to the internet so you can monitor and reduce electricity consumption. 2. Ultra-efficient Heat Pumps The Building Technologies Office is building a future heat pumping system that can both cool and warm your home by transferring heat from one room to another. 3. Carbon Based Clothes Dryer This appliance will have the same concept as the previous heat pump technology but it can

All lasers are made up of three components: External pump source Active laser media Resonator The pump source guides external energy to the laser. The active laser media is located inside the laser. Depending on the design, the laser medium can consist of a gas mixture (CO2 laser), from a crystal body (YAG laser) or glass fibers (fiber laser). When energy is fed into the laser medium through a pump, it emits energy in the form of radiation. The active laser medium lies between two mirrors, the "resonator". One of these mirrors is a one-way mirror. The active media laser radiation is amplified in the resonator. At the same time, only certain radiation can leave the resonator through the one-way mirror. This bundled radiation is laser radiation. Laser beam property: monochromatic and high coherence Laser radiation has three basic properties: Monochromatic. This means that the radiation consists of only one wavelength. High coherence and hence an accidental phase. The laser wave

After understanding the various types of bulbs used in stage lighting, this time we will focus on discussing the development of LEDs specifically. LED technology has come a long way since it was first introduced. Starting from Single Diode, SMD, to the last COB. Single Diode Initially, single diode LEDs only produce one color of light such as red, or green, or blue LED. To obtain light of various mixed colors, a fixture using a standard single diode must place a number of diodes of different colors in one housing, which are lit together, or partially, depending on the desired color. For example, to get purple, partially turn on blue and red diodes. To get a yellow color, some red and green diodes, and so on. The problem is, sometimes the light produced is shaded when illuminating an object because the light source varies from various points. SMD (Surface Mount Diode) With SMD LED technology, several LED color chips can now be attached to the PCB surface, making it possible to produce v